Knock It Off! Episodes

HVAC Planters

Geometric-looking, metal planters are very in right now but not surprisingly, they are really expensive! But, you can DIY a pair of sleek metal planters using nothing more than simple HVAC supplies.

Materials Needed:
  • (2) 90 degree metal HVAC duct pieces
  • (2) HVAC flat trays
  • Metal snips
  • Self-tapping sheet metal screws
  • Drill
1. Cut each 90 degree piece in half using the metal snips. Be careful! It's a good idea to wear gloves because the metal is sharp!

2. Match the ducts up with each other so that the 90 degree pieces slide into each other using the tracks on either side. This may take some maneuvering so be patient!

3. Drill three pilot holes on the bottom of each long side of the rectangle and two on each short side. Slide the rectangle unit into the tray base and screw the self-tapping screw through the base into the pilot holes you've pre-drilled.

4.Drill pilot holes up the side on each seam and then screw with the self-tapping screws. Repeat this entire process on the second planter and you're done!

Roof Deck and Patio Makeover in the City

Other segments featured on this episode of Knock It Off!:

DIY Wood Privacy Screen
DIY Wood Privacy Screen
This urban patio had not much more than three concrete walls and a concrete floor. To hide the chain link fence and unsightly walls on either side of the homeowner's patio, Monica and Jess made some modern privacy screens that improved the style and stayed within budget.
Watch Segment
PVC Pergola
PVC Pergola
Monica and Jess work out an interesting Pergola idea for the back patio using PVC piping. With an upscale urban cafe look, it works perfectly in the city and provides more lighting.
Watch Segment
The Live Well Network
Knock It Off!
Mirror/Mirror
Live Big with Ali Vincent
My Family Recipe Rocks!
Food Rush
We Owe What?
Let's Dish
Deals
Mexico: One Plate at a Time
Home with Lisa Quinn
Hiring America
Children's Programming
The Chew
Military Makeover
The Balancing Act